Please find a user guide for all TFX Models below
TFX Zosma 900 / Propus 1200
Tail switch controls all functions of the torch:
- One Full Press turns the light on and off
- Soft presses cycle through high, mid, low brightness levels
- Two quick soft presses when the light is on activates the Strobe function
- Second user mode available and enabled with 10 quick soft presses while the light is on
-
- Activates only high output when turning the torch on/off
- Revert back by following the same steps above
-
TFX Gacrux 2500
Tail switch and ambidextrous lever switches control all functions of the torch:
- Central button:
-
- One Full press turns torch on/off (will be on previously used light output)
- One Half-press provides momentary operation
- Quick half-presses within 1 second cycle through low, mid, high and a Full click selects the brightness level you're on.
-
- Lever Switches:
-
- Press and hold for momentary strobe (turns off when released)
- Single press turns strobe on and off
-
TFX Propus 3500
Switch on the barrel controls all functions of the torch:
- Battery indicator displays green, green flashing, red, or red flashing to notify user of battery level
- One Full press turns torch on/off (will be on previously used light output)
- Once turned on the brightness level can cycled through in a loop with single presses
- Strobe mode is activated with two quick presses and then holding the button
- Release the button to exit strobe and return to the previous mode
- Hold down the button to turn off the light
TFX Arcturus 5000
Two switches on the barrel control all functions of the torch:
- Top switch controls mode selection
- Bottom switch controls Power
- Battery indicator displays four, three, two, one, or no lights - One light indicates the need for immediate charging
- White Light:
-
- Press power switch once to turn on in the last used white brightness level
- Single presses of mode switch cycle through high, mid, low starting from the current setting
- Hold down power switch to turn off the light
-
- RGB Light:
-
- Press mode button once to turn on in the last used RGB brightness level
- Single presses of mode switch cycle through red, green, blue starting from the current setting
- Hold down power switch to turn off the light
-
- Strobe Light:
-
- Two quick presses of the power switch and then holding the button down.
- Once the button is released the torch will exit strobe and go back to the previous mode.
-
TFX Arcturus 6500
Two switches on the barrel control all functions of the torch:
- Top switch controls mode selection
- Bottom switch controls Power
- Battery indicator displays four, three, two, one, or no lights - One light indicates the need for immediate charging
- White Light:
-
- Press power switch once to turn on in the last used white brightness level
- Single presses of mode switch cycle through high, mid, low starting from the current setting
- Hold down power switch to turn off the light
-
- RGB Light:
-
- Press mode button once to turn on in the last used RGB brightness level
- Single presses of mode switch cycle through red, green, blue starting from the current setting
- Hold down power switch to turn off the light
-
- Strobe Light:
-
- Two quick presses of the power switch and then holding the button down.
- Once the button is released the torch will exit strobe and go back to the previous mode.
-
Comments
0 comments
Article is closed for comments.