Power button on the head controls all functions of the head torch:
Set 'Transport Lock'
- Headtorch must be powered OFF > Hold Power button down for 3 seconds > Headtorch will blink x4 > Release Power Button > Transport Lock is ON
- Hold Power button down for 3 seconds > Headtorch will blink x4 > Release Power Button > Transport Lock is OFF
______________________________
Low Battery Warning
- When the head torch is below 10% battery life it will blink 3 times in intervals until the battery is completely flat.
______________________________
Set 'Mode 1'
- Headtorch must be powered OFF > Hold Power button down for 6 seconds > Torch will blink x1 > Release Power Button.
'Mode 1' Functions
- One press turns the light on 'High' power setting
- Additional presses (within 2 seconds) cycle through mid power, low power and then finally off.
_________________________________
Set 'Mode 2'
- Headtorch must be powered OFF> Hold Power button down for 9 seconds > Torch will blink x2 > Release Power Button.
'Mode 2' Functions
- One press turns the light on 'Low' power setting
- Additional presses (within 2 seconds) cycle through mid power, high power and then finally off.
_________________________________
Boost
- Headtorch can be powered ON or OFF > Press the power button x2 in quick succession > Temporary boost mode activated > Lasts for approximately 10 seconds.
_________________________________
Strobe
- Headtorch must be powered ON > Hold the power button down for 1 second > Strobe mode activated > Press power button x1 to deactivate.
_________________________________
Compatible Colour Filter Set
- Please find 36mm Filter set here.
_________________________________
Compatible Replacement Headband
- Please find replacement headband here.
Comments
0 comments
Article is closed for comments.